Location: Bard B55		Philip Carubia 607-255-3371 pmc228@cornell.edu B-57 Bard Hall
Grimco Compression Molding press
Compression Molding press Grimco Compression Molding press Training required to use this instrument: General Lab Safety Training (EHS 2555)

Compression molding press, with two 15˝x 15˝ electrically heated platens, 425°C, vertical 50-ton hydraulic cylinder, programmable ramp and soak temperature and pressure control.

Facilities Sections

User Instruments

Electron and Optical Microscopy
- Transmission Electron Microscopy
- Scanning Electron Microscopy
- Scanning Probe Microscopy
- Focused Ion Beam
  - FEI Strata 400 STEM FIB
- Optical Microscopy
- Sample Preparation for Electron Microscopy
Spectroscopy and Electronic Measurements
- Electronic & Magnetic Measurements
- Optical Spectroscopy
- Electron Spectroscopy
  - X-ray Photoelectron Spectroscopy
  - EELS Microscopy
    - FEI F20 TEM STEM
    - NION UltraSTEM 100
- Mass Spectroscopy
  - Waters MALDI Micro MX (MALDI-TOF)
- Dielectric Spectroscopy
  - Novocontrol Broadband Dielectric Spectrometer
  - Novocontrol Thermal Stimulated Depolarization Current (TSDC)
Surface Analysis and Characterization
Soft Matter/Polymer Analysis
X-ray and Diffraction Analysis
Mechanical Properties Testing and Analysis
- Dynamic Testing
  - TA Instruments DMA Q800 Dynamic Mechanical Thermal Analysis (DMTA)
- Hardness Testing
  - Micro Hardness Tester
- Micro Mechanical testing
  - Micro Mechanical Analyzer
- Thermal Analysis
  - TA Instruments Q400EM Thermomechanical Analysis (TMA)
  - TA Instruments DMA Q800 Dynamic Mechanical Thermal Analysis (DMTA)
- Size Classification
  - ATM Sonic sifter
Thin Film Deposition and Material Processing
- Thin films and coatings
- Wet chemical
  - Laurell-WS-400A-Spin-Coater
- Heat Treating
  - Air Furnaces
  - Controlled Atmosphere Furnaces
  - High Vacuum Furnaces
  - Vacuum Ovens
    - Hotpack Vacuum Oven
- Shaping/Pressing
  - Molding
    - Grimco Compression Molding press
  - Cold pressing
    - Carver 25 ton press
    - Parr Pressure Reactor
- Glove Boxes
  - Inert Gas Glove Box
Sample Preparation, Cutting, Polishing, Shaping, Joining, and Machining
- Sub-micron-scale Cutting
- Macroscopic Cutting and Drilling
  - Jet machining
    - SS White Sand Blasting Unit
  - Wafer saws
    - MicroMech Wafering Machine
    - Aremco Wafer cutting Diamond Saw
  - Wire saws
    - WELL Diamond wire Saw
  - Abrasive Saws
    - Cutoff Saw 8 Inch
    - Cutoff Saw 12 Inch
  - Diamond Saws
- Polishing/Grinding
  - Allied Multiprep polisher-A
  - Allied Multiprep polisher-B
  - Abrasive Grinding/Polishing
- Mixing/Milling
- Sample Mounting
  - Buehler Simplemet II mounting press
  - Cold Mounting Epoxies
- Sample Cleaning
- Machining
  - Wire Pulling
    - Meteor Coil Winder
  - Welding/ Brazing/ Bonding
    - Spot welding
      - Unitek Portable
      - Stationary Spot Welder (Hughes HRW250B)
    - Wire Bonding
      - MEI 1204 manual bonder
      - Kulicke and Soffa 4500 manual bonder
Test Equipment Lending Library
- Lending Library
General Test and Measurement Equipment
- Leak detectors
  - Varian 979 Port Leak Detector
  - Extorr XT200 Residual Gas Analyzer
- Portable Vacuum and Pump Systems
- Optical Pyrometers
  - Optical-Pyrometers-Portable
- Balances
  - Ohaus-Balance
  - Mettler Balances
- Rough Pumps
Poster Help and Printing
- Poster Help
- Poster Printing at Mann Library

Search Equipment

Other Facilities

Facilities Contact

Jurriaan Gerretsen
Director of Shared Facilities
t. 607.279.6955

Grimco Compression Molding press

Facilities Sections

Facilities Policy

User Account Request

User Rates

Coral Instructions

Microscopy Image Contest

User Instruments

Search Equipment

Other Facilities

Other MRSEC Facilities

The Cornell High Energy Synchrotron Source (CHESS)

The Cornell Theory Center

Cornell NanoScale Science & Technology Facility (CNF)

The Nanobiotechnology Center (NBTC)

Facilities Contact

Jurriaan Gerretsen

Email Facilities