Parr Pressure Reactor | ||
|
Location: Bard B56 |
Philip Carubia | |
|---|---|---|
|
Training required to use this instrument: |
||
|
The Parr Pressure Reactor is a device that is used to produce chemical reactions at varying temperatures and pressures. The reactor utilizes a cylinder that is 2" deep and 2.5" in diameter with a volume of 160mL. | max furnace temperature: 350° | max pressure: 3000psi at 350°C | max recommended fill volume: 120mL max recommended fill for H2O: 100mL | ||
|
vessel part no. 452HC9 | ||
|
http://www.chem.purdue.edu/chemsafety/Equip/ParrReactorSafetyInfo-230m.pdf | ||
Facilities Sections
User Instruments
- Electron and Optical Microscopy
- Transmission Electron Microscopy
- Scanning Electron Microscopy
- Scanning Probe Microscopy
- Focused Ion Beam
- Optical Microscopy
- Sample Preparation for Electron Microscopy
- Spectroscopy and Electronic Measurements
- Electronic & Magnetic Measurements
- Optical Spectroscopy
- Electron Spectroscopy
- X-ray Photoelectron Spectroscopy
- EELS Microscopy
- Mass Spectroscopy
- Dielectric Spectroscopy
- Surface Analysis and Characterization
- X-ray photoelectron spectroscopy
- Asylum-MFP3D-Bio-AFM-SPM
- Veeco Dimension 3100 Ambient AFM STM
- JEOL JSPM 4500 UHV STM
- Nanonics Multiview 1000 or 2000 Near-field Scanning Optical Microscopy (NSOM)
- Renishaw InVia Confocal Raman microscope
- ADE Phase Shift MicroXAM Optical Interferometric Profiler
- Contact Profilometry
- Soft Matter/Polymer Analysis
- Size Exclusion Chromatography
- Thermal Analysis
- Waters MALDI Micro MX (MALDI-TOF)
- X-ray and Diffraction Analysis
- Mechanical Properties Testing and Analysis
- Dynamic Testing
- Hardness Testing
- Micro Mechanical testing
- Thermal Analysis
- Size Classification
- Thin Film Deposition and Material Processing
- Thin films and coatings
- Wet chemical
- Heat Treating
- Shaping/Pressing
- Molding
- Cold pressing
- Glove Boxes
- Sample Preparation, Cutting, Polishing, Shaping, Joining, and Machining
- Sub-micron-scale Cutting
- Macroscopic Cutting and Drilling
- Jet machining
- Wafer saws
- Wire saws
- Abrasive Saws
- Diamond Saws
- Polishing/Grinding
- Mixing/Milling
- Sample Mounting
- Sample Cleaning
- Machining
- Wire Pulling
- Welding/ Brazing/ Bonding
- Spot welding
- Wire Bonding
- Test Equipment Lending Library
- General Test and Measurement Equipment
- Leak detectors
- Portable Vacuum and Pump Systems
- Optical Pyrometers
- Balances
- Rough Pumps
- Poster Help and Printing
Search Equipment
Other Facilities
Facilities Contact
Jurriaan Gerretsen
- Director of Shared Facilities
- t. 607.279.6955
