HomeFacilitiesInstrumentsUser InstrumentsMechanical Properties Testing and AnalysisTA Instruments DMA Q800 Dynamic Mechanical Thermal Analysis (DMTA)

TA Instruments DMA Q800 Dynamic Mechanical Thermal Analysis (DMTA)

Bard Hall B56

Provides time, temperature and frequency domain mechanical analysis of materials as well as static mechanical testing such as tensile and compressive analysis. It can also be used for transient testing such as creep and stress relaxation.  available geometries include: tension, shear, compression, 3 point bending, and dual cantilever.  The DMA is very similar to the DHR3 Rheometer but for stiffer materials.


Specifications

  •  Force loading: 0.001 to 18 N
  • Deformation resolution: 1 nm
  • Frequency range: 0.01 to 50 Hz
  • Temperature range: -120 to 400°C
  • Test atmosphere: air or nitrogen


 

DMA SOP

For rates information, please see the rates page.
Primary Contact

Philip Carubia
607/255-6757
pmc228@cornell.edu
Bard Hall, Room B-57

Secondary Contact

Chistopher (Kit) Umbach
607/254-5423
ccu1@cornell.edu
Thurston Hall, Room 114
Powered By: AcademicsWeb