HomeFacilitiesInstrumentsUser InstrumentsThin Film Deposition and Material ProcessingKSV-NIMA-KN2002-Langmuir-Blodgett-Trough


Bard B47A

If a monolayer coating is needed, then a separate KSV NIMA Langmuir-Blodgett trough with dipping capability is available.  The Langmuir-Blodgett trough has a sensitive force balance and moveable barriers that can maintain the surface pressure of a monolayer as the substrate is withdrawn from the trough with the monolayer at its surface.  The maximum substrate size is 56 mm high, 52 mm wide, and 3 mm thick.  The subphase volume in the trough is 176 ml.  The force balance can sense a surface tension of  up to 150 mN/m with a resolution of 4 μN/m.  Substrates can be dipped in either a vertical or horizontal geometry. The Langmuir-Blodgett trough can also be used without the dipper for a variety of experiments where monitoring and control of surface pressure of monolayer films is needed, such as enzyme kinetics or monolayer hydrolysis.

Langmuir-Blodgett trough SOP (2020-11)

For rates information, please see the rates page.
Primary Contact

Mark Pfeifer
(607) 255-4161
Bard Hall, Room B-57
Powered By: AcademicsWeb